Firstly, when connecting the computer UPS uninterruptible power supply, the following points should be noted:
- Choose the appropriate UPS: Choose a suitable UPS based on your computer’s power requirements. The power of UPS is generally expressed in VA (volt ampere) units
- This is a standard unit for measuring the power that UPS can provide.
- Set up power connection: Before connecting the UPS, make sure that both the computer and UPS are turned off, and disconnect the power adapter. Then, take out the UPS
Output socket, plug it into the output interface of UPS (usually labeled “OUT”). The number of sockets varies depending on the model and type of UPS, usually several. - Connect the power adapter: Insert the power adapter plug into the input socket of the UPS (usually labeled “IN”). Then insert the plug of the power adapter into it
- Wall socket.
- Connect the computer: Connect the computer to the UPS output socket through a power adapter. If you have other devices that need to be connected to UPS, you can also do so
- Connect them to the output socket of the UPS.
- Connection between UPS and computer: The communication interface (usually USB or serial port) of UPS can be connected to the computer to monitor the power status of UPS through software
- State and real-time information, and trigger automatic shutdown in case of power interruption.